AiM Sports MXL Pro 05 Dash Display

Street Smarts

The MXL Pro can be interfaced (via CAN or RS-232 serial) with a variety of vehicle ECU's (engine control units) including MoTec, Pectel, DTA, MBE, EFI, Seat, Autronic, Bosch, Racetech and Carmo. Or use the Autosport connector and deploy a powerful array of sensors on your vehicle, including pressure, temperature, throttle, steering, suspension, speed, Lambda sond, and more. The additional CAN protocol allows the MXL Pro to interface with external expansion modules.

The lateral G sensor lets you create a map of the track when you download the data to your PC. This allows you to match up RPMs, gear positions and more to exact track positions to fine tune your driving.  By adding brake position sensors, for example, you can monitor driving behavior and actually see where on the track the driver is braking, and much braking is applied.  This is invaluable for driver training.

Science over Superstition

The MXL Pro is a self-contained, true data logger that acquires data from all connected sources 1 - 500 times per second (depending on sensor and input type). Using our powerful Race Studio 2 software you can download your data to your PC via USB and get a professional analysis of your performance data.  You can also replay the data on the MXL without a PC or software. The MXL Pro features 16 MB of non-volatile memory, retaining data even when the power is off, and has an Auto-Power off feature to preserve the battery life.

Connect sensors to the MXL Pro and it displays, samples, and stores the data from those sensors. For example, you can connect a temperature sensor to the cylinder head of your engine and get continuous reads on your engine temperature.  See the temperature values on the display as you drive, and download the recorded data to your PC and review the numbers on a graph later on. AiM Sports uses sophisticated data acquisition technologies in the MXL to make this process fast, accurate, reliable and cost-effective.

Unlock the Power

Connect the MXL Pro to your vehicle’s ECU and unleash the MXL’s true power: logging and displaying dozens of channels straight from the vehicle’s nerve center, including specialized sensors built into the vehicle.  This is often the quickest and easiest setup, needing only 1 cable connection to the ECU instead of multiple connections to analog sensors, yet it yields the most dramatic results.  In addition - you can leverage your aftermarket ECU investment.

Get the most from practice and training sessions by objectively comparing data from runs using different vehicle setups, drivers, and driving strategies to find the winning combinations.

The MXL Pro uses state of the art algorithms to sample, calculate and display RPM, lap time, gear position, speed, temperatures and more. A GPS module will create detailed 3D track maps.

Features

• Wide, brilliant display (5.5") with backlight standard
• RPM displayed by number and graphic curve
• Configurable RPM scaling
• 1 RPM input
• Internal G sensor / accelerometer
• 4 Speed inputs
• 12 analog input channels: temperatures, pressures, potentiometers, Lambda sond, onboard and custom sensors
• Samplng rates: digital inputs up to 50 Hz, analog thermocouple up to 100 hz, analog potentiometer up to 500 Hz
• Gear number calculated or sampled from on-board sensor
• 10 shift light LED's - green - yellow - red
• 6 freely configurable alarm LED's for min/max alarm
• Fast USB data download to your PC for analysis with Race Studio software
• Infrared lap receiver and infra red lap transmitter
• Lap times - split times
• Configurable number of split times
• 16 MB of non-volatile memory
• Built in clock and calendar for test management
• Internal data acquisition system
• Total and partial odometer (with reset)
• Rugged, water resistant, lightweight aluminum chassis
• Optional built-in GPS system
• CAN/Serial (RS-232) interface connects to many ECU's (see list at right)
• 2 Autosport connectors
• 4 Speed inputs (for wheels, for example)
• CAN protocol for external expansion modules

Specifications

• Dimensions: 6.85" wide x 4.33" (174 x 110 mm)
• Display dimensions: 5.5" x 2.6" (140 x 67 mm)
• External 9-15 V power supply
• 16 MB non-volatile internal memory